Enclosed with this package is one (1) main display unit and one (1) remote rain collector. The rain gauge is equipped with the following features and functions: A. Upper Window - Displays the total rainfall, clock and date. RF Signal Indicator - Indicates the signal-receiving status of the unit Lower Window - Displays the rainfall history MODE/SET BUTTON - Switches between the clock and calendar in normal mode - Press and hold to enter the setting mode - Daily and total rainfall display Nine-day rainfall recall history Easy wireless installation E. SINCE BUTTON - Displays the start day for total rainfall - Press and hold to clear the total and current rainfall and to reset the start date FEATURES & KEY CONFIGURATION : MAIN UNIT F. HISTORY BUTTON - Displays the rainfall history in normal mode - Advances digits in setting mode. SEARCH BUTTON - Initiates a search for the rain gauge sensor H. RESET BUTTON - Returns all settings to their original default values I. [IN/MM] SWITCH - Select rainfall measurement in inches or millimeters A B C H D E G F I 1 GB GB RAIN COLLECTOR: FEATURES 1. Remove the screws on the Rain collector as indicated in the diagram and insert the batteries in accordance with the polarities shown. a b 2. Remove the fiber tape from the Rain Collector assembly. Antenna -Transmits signal to main unit Cross - To level the rain collector 3. Position the main unit and rain collector within effective range of each other (up to 100 feet). Place the rain collector on a level surface. Add a few drops of water; if the water collects at the center of the cross, the collector is level. BATTERY INSTALLATION: MAIN UNIT The main unit uses 2 UM-3 or AA alkaline batteries. Unscrew the battery door at the bottom of the unit...