Frakobl ISO-stikkene. Maak de ISO-connectoren los. Irroita ISO-liittimet. Débranchez les connecteurs ISO. Trennen Sie die ISO-Steckverbinder ab. Scollegare i connettori ISO. Koble fra ISO-koblingene. Check if your car radio is working before you disconnect the wires. Make sure you have a note of your car radio code as your radio will be disconnected during the installation. It is recommended that before starting installation, you disconnect your car battery in accordance with the manufacturer's guidelines. The Permanent Docking Kit will only mute car speakers which are connected directly to the car radio through the ISO standard speaker connector, and it will only issue voice instructions through the front left and right speakers which are connected through this connector. If for example an additional amplifier is connected directly to your car radio, it will not be muted. Før du begynder DK Kontroller, at radioen fungerer, før du frakobler ledningerne. Sørg for, at du har skrevet koden til bilradioen ned, da radioen frakobles under installationen. Vi anbefaler, at du frakobler bilbatteriet i henhold til producentens retningslinjer, før du begynder installationen...