Скачать инструкцию



Фрагмент инструкции: руководство пользователя IBM THINKPAD 600X

Подробные указания по применению содержатся в руководстве пользователя.

Front view (with external diskette drive) Brightness control Suspend indicator Battery indicator Internal speakers Hard-disk drive Liquid crystal display (LCD) System-status indicators Built-in microphone TrackPoint Volume control PC Card eject buttons PC Card slots Infrared port Headphone jack Line-in jack Microphone jack External diskette drive Diskette eject button Rear view External-input-device connector Security keyhole External-monitor connector Parallel connector System-expansion connector Serial connector Power jack Modem connector Power switch Reset switch Universal serial bus (USB) connector Click buttons UltraslimBay LCD latch Video-out connector © Copyright IBM Corporation 1999. All rights reserved. Setting up your computer You are now ready to assemble and start your computer. 1 If you have a printer, open the connector cover. Connect one end of the printer cable to the parallel connector and the other end to your printer. Then power on the printer. 3 Connect the AC Adapter to the computer's power jack (at the rear of the computer) in the order shown. 3 2 1 2 If you want to use the CD-ROM and the diskette drive at the same time, you can attach the diskette drive to the external-diskette-drive connector as follows: Insert the diskette drive in the diskette-drive enclosure and connect it firmly 1. Connect the cable to the external-diskette-drive connector 2. 4 Open the liquid crystal display (LCD). Pull the LCD latches 1 and open the LCD 2. Then position the LCD so that it is convenient for viewing. 1 2 2 2 1 1 1 5 Power on the computer. a) Push and release the power switch 1. The power switch automatically snaps back to its original position. b) Adjust the brightness of the display with the brightness control 2...
Copyright © 2005 - 2012 - Diplodocs - Все права защищены.
Торговые марки принадлежат их соответствующим владельцам.