Getting started Getting started Mounting your navigation device 1. Push the EasyPortTM Mount on your TomTom XL against the windshield in your car. 1 2. Adjust the angle of your device. 2 3. Lock the EasyPort Mount by twisting the base. 3 4. Insert the Car Charger into your device. 4 2 5. Insert the Car Charger into the cigarette lighter in your car. 5 6. Switch your device on by pressing the On/Off button on the top of your device. 6 7. You now have to answer some questions to set up your device. Tap the screen to answer the questions. 7 8. To remove the Mount from your windshield, first unlock the EasyPort Mount, then gently pull one of the tabs. The Mount comes off of the windshield. 8 GPS reception When you first start your TomTom XL navigation device, the device may need a few minutes to determine your GPS position and show your current position on the map. In the future, your position will be found much faster, usually within a few seconds. To ensure good GPS reception, you should use your device outdoors. Large objects such as tall buildings can sometimes interfere with reception. Troubleshooting In rare cases, your TomTom XL navigation device may not start correctly or may stop responding to your taps. 3 First, check that the battery is properly charged. To charge the battery, connect your device to the car charger. It can take up to 2 hours to fully charge the battery. If this does not solve the problem, you can reset the device. First turn your device off and wait for at least 10 seconds. Then use a straightened paper clip, or something similar, to push the reset button. The reset button is on the bottom of your device. 4 2. Driving View Driving View 1. Your current position. The name of the next street or street sign information. Your speed and the speed limit, if known. Tap this area to repeat the last spoken instruction and to change the volume...