The UT-118 includes the following digital features. Callsign calling In the digital mode, your callsign and the receiving callsign (or CQ message) are included in each transmission. The callsign squelch allows you to choose an incoming call selected by the callsign. Also, received callsigns are automatically stored in the memory. Position exchange with external GPS receiver When connected to an external GPS receiver*, position information can be exchanged with other stations. When the receiving side is connected to a PC**, position monitoring is possible. * NMEA 0183 output and RS-232C interface are required. ** Position mapping software required (Not supplied by Icom ). And more digital features · 20-character short data message · Digital code squelch · EMR communication · Digital pocket beep · Stand-by beep 7W powerful output power A powerful 7W* output power provides superior transmit power. All this power is available with the supplied battery pack. Reduced power settings also allow you to adapt to the communication conditions and provide longer operating time. * 5W for UHF. 200 memory channels and 10 memory banks Up to 200 regular memory channels can be stored with a 6-character channel name, tone and duplex settings. The memory channels can be tagged with A-J bank name and allows you easy channel management. In addition, use Icom's exclusive DMS (Dynamic Memory Scan) system to scan selected memory banks by simply adding and deleting bank links. Built-in CTCSS/DTCS Built-in CTCSS/DTCS tone codes provide quiet stand-by and allow you to access a closed repeater. The pocket beep alerts you when a matched tone frequency is received. The tone scan detects the tone frequency used in the receiving frequency...