Scope of application This universal remote control can replace up to eight normal remote controls and is able to operate the following device types: TV VCR DVD CD CBL ASAT DSAT AUX Television set with video text, projector Video recorder DVD player and DVD recorder CD player Pay TV decoder Analogue satellite receiver Digital satellite receiver for additional devices (amplifier, tuner, MD, etc. ) The names on the TV, VCR, etc. source keys are only for overview purposes. Of course, you may assign the keys to other device types ("Flex Mode"). 7 Univ-FB_MD80383_AUS. fm Seite 8 Dienstag, 24. Januar 2006 8:57 08 Inserting batteries 2 micro batteries LR03 AAA are required. We recommend using alkaline batteries for longer durability. Remove the battery compartment cover by pushing the clip in the direction of the cover. Insert both batteries into the compartment while observing the +/polarity. Replace the cover. If the batteries have been inserted correctly, the time display 0:00 will appear in the display. The programmed settings (codes, learn function and macros) will remain stored in the universal remote control when you remove the batteries. Date and time will be retained during battery change but the internal clock will not continue to run without the batteries and will need to be reset after the batteries have been inserted. Setting the date and time Set the date and time using both SET and T/D keys below the display. To do so, insert a sharp object, such as an unbent paperclip, into the depressions. Press SET twice. The number 12. will appear in the display. Continue pressing T/D, until the current month appears. Press SET to save the month and to call up the settings for the date. Continue pressing T/D, until the current date appears. Press SET to save the date and to call up the settings for the hours. 8 Univ-FB_MD80383_AUS. fm Seite 9 Dienstag, 24...