The upgrade process will take about 30 minutes. The WorkCentre will be inoperable during this time. Please make sure that the WorkCentre is free of faults and jams before commencing any part of the upgrade. Prepare for the Upgrade The purpose of this section is to identify which of the 2 available upgrade files needs to be applied to your machine(s) and then download the appropriate upgrade file to your workstation. Use the following procedure to determine what type of "Controller ROM" is installed in your machine and then download the appropriate software upgrade file to your workstation. In your web browser, enter http:// followed by the TCP/IP address of the machine in the Address or Location field, then press [Enter]. The machine's internal web page, CentreWare Internet Services, will appear. Click on the [Properties] tab. Expand the [General Setup] folder and then select the document icon [Configuration]. Within the "Configuration" screen, look below the Software header and make a note of whether you see "Controller ROM" listed or "Controller + PS ROM" listed. In your web browser, enter http:// www. xerox. com into the Address or Location field, then press [Enter]. The Xerox home page will appear. Navigate to the "WorkCentre 7232/7242" product web page and scroll down the page to locate the Firmware & Machine Upgrades header. Click on the appropriate System Software Upgrade file link based on the following: If your machine has "Controller ROM", click the "System Software Upgrade Version 1. 5 - Standard" link. If your machine has "Controller+PS ROM", click the "System Software Upgrade Version 1. 5 - Postscript" link. Click Accept if you accept the license agreement...