the Yaesu FT-8800 series is ready for you! ACTUAL SIZE *Simulated LCD display 29/50/144/430 MHz Quad Band FM Mobile FT-8900R FT-8800 Series 144/430 MHz FM DUAL BAND TRANSCEIVER VERSATILE SCANNING CAPABILITY The FT-8800 series lets you scan the memories, the entire operating band, or a portion of the band. The transceiver will stop on signals encountered during the scan, resuming the scan after a time delay or after the carrier drops out. During band scanning, you may configure the FT-8800 series to remain within the current band, or hop to the other band, once the band edge is reached. Dualfrequency "Priority Channel" operation is also provided. And the Programmable Memory Scan feature allows you to set up sub-band limits, so you won't waste time scanning or tuning in the SSB/CW portions of the bands. 50-TONE CTCSS/104-TONE DCS (DIGITAL CODE SQUELCH) TONE SYSTEMS Providing excellent performance even under difficult link conditions, Yaesu's 50-tone sub-audible CTCSS and 104-tone DCS signaling systems ensure that you have full access to repeater and remote-base inputs, and the built-in CTCSS/DCS decoders allow silent listening on busy channels. Plus you get Tone Search Scanning, which will scan for the tone being received on an incoming signal, allowing you to match tones quickly when operating on a new repeater system. ARTSTM (AUTO-RANGE TRANSPONDER SYSTEM) Included in the FT-8800 series is Yaesu's exclusive ARTSTM feature which provides a "hand-shake" with other ARTSTM-equipped stations during emergency work. If an "out-of-range" conditions exists with, for example, a low-power hand-held unit, ARTSTM will alert the FT-8800 series user so the hand-held's operator can be advised to move to a better location...