Please read these instructions carefully. SAFETY SYSTEM This appliance is fitted with two safety mechanisms. To start the juice machine, the pulp collector (I) must be correctly in position and the cover (E) must be properly secured by the clamp (J). Opening the clamp (J) or removing the pulp collector (I) will stop the juice machine. At the end of a cycle, place the switch (K) in the "0" position and wait until the sieve stops completely before removing the cover. SAFETY INSTRUCTIONS - Always check the sieve (F) before use. - Never use the juice machine if the sieve is broken or damaged or if there is visible cracking or crazing or the sieve is torn. If there is any evident damage to the sieve, contact an Approved Service Centre. Handle the sieve with care (sharp edges). - For your safety, this appliance is compliant with applicable standards and regulations: * Low Voltage Directive * Electromagnetic Compatibility Directive * Regulations governing materials in contact with food * Environment: Plastics Directive, 2002/95/EC - Check that the supply voltage shown on the rating plate of the appliance matches that of your electrical system. Any connection error will invalidate the guarantee. - Never place or use this appliance on a hotplate or near an open flame (gas cooker). - Do not immerse the motor unit or put it under running water. - If the supply cord is damaged, it must be replaced by the manufacturer, an approved after-sales service or a similarly qualified person, in order to avoid any danger. - Always use this product on a solid , stable work surface that is not subject to water splashes. Do not turn it over. - Never dismantle your appliance. Apart from the usual care and cleaning, the appliance requires no maintenance on your part...