Click Start Click Control Panel Click Network Connections Double click the Local Area Connection icon Make sure "Show icon in notification area when connected" is ticked Click on "Internet Protocol (TCP/IP) Click on "Properties" just below Make sure both options are set to "Obtain automatically" Click OK Close the previous window. Next open Internet Explorer Click Tools Click Internet Options. Click the Connections Tab Select "Never Dial A Connection" Click on LAN Settings. Tick the box for "Automatically Detect Settings" Make sure no other options are ticked Click OK On next screen click Apply and then OK Close Internet Explorer and turn the PC off (Shut Down) Leave the system for 30 seconds and Power back on. When back in Windows: Connect the router to the power supply. Lights will start to come on Connect the router to the PC via the supplied Ethernet cable Do not connect the ADSL cable at this stage You should get a notification that you have connected Open Internet Explorer In the address bar of Internet Explorer type 192. 100 Press enter The following appears Click on the British Flag (middle option) in bottom left corner of screen Click on "ADSL Connection" from the left hand menu When the Connect box appears Enter the default username and password User name: admin Password: admin Click OK Select Great Britain as the country If your ISP is listed in the "Internet Provider" drop down box then select it. If it isn't listed then select "Expert Mode" from the bottom left These settings will need to be obtained from your Internet Service Provider (ISP). If you have not obtained these settings from your ISP you MUST obtain them before contacting the Medion helpline. We will be unable to provide help without these settings...