Use the headset to talk hands-free on your iPhone. Follow these instructions to get started. Pair the Headset with iPhone 1 Connect the included iPhone Dual Dock to a USB 2. 0 port on your computer (not on the keyboard). 2 Connect iPhone and the headset to the dock. The headset pairs with iPhone automatically. Dock The first time you connect the headset, let it charge for about an hour until the status light on the headset turns from amber to green. 3 Remove iPhone and the headset from the dock. Then press the button on the top of the headset so that calls will be routed through the headset. 3 You can also pair the headset with iPhone and charge the headset using the included iPhone Travel Cable. Connect the cable to your computer, then connect the headset and iPhone to the cable. Cable 4 Make or Answer a Call 1 Place the headset in either ear with the microphone pointed towards your mouth. Microphone Note: Placing the included foam pad over the speaker may provide a more comfortable fit. 2 Make a call on iPhone, or press the button on top of the headset to answer an incoming call. Button Status light If you answer an incoming call by tapping the iPhone touchscreen, audio is routed through iPhone. 3 When you finish, press the button to end the call. Adjust the Volume m Use the volume buttons on the side of iPhone. WARNING: For important safety information about avoiding hearing loss, see page 13. 5 What Else You Can Do To Answer incoming call End current call Decline incoming call Do this Press button. Press button. Press button for about one second, until you hear a beep. Press button. Switch to incoming or on-hold call and put current call on hold Switch to incoming or on-hold call and end current call Check whether headset is turned on Turn headset on Turn headset o Press button for about one second, until you hear a beep. Press button...