support. zyxel. se, your network is accessible to any wireless networking device that is within range. · Basic security: WEP (Wired Equivalent Privacy) encrypts data frames before transmitting over the wireless network. The higher the WEP Encryption, the higher the security but the slower the throughput. · Extend (WPA-PSK) security: Configure a Pre-Shared Key. Choose this option only if your wireless clients support WPA-PSK. Note: The wireless clients and Mer produkthjalp finns pa http://www. support. zyxel. se must use the same SSID, channel ID and WPA-PSK (if WPA-PSK is enabled) or WEP encryption key (if WEP is enabled) for wireless communication. OTIST · OTIST (One-Touch Intelligent Security Technology) allows your Mer produkthjalp finns pa http://www. support. zyxel. se to assign wireless clients the Mer produkthjalp finns pa http://www. support. zyxel. se's SSID and static WEP or WPA-PSK encryption settings. The wireless client must also support OTIST and have OTIST enabled. 7 ENGLISH Auto or No Wireless Security A Enter a unique name to identify the Mer produkthjalp finns pa http://www. support. zyxel. se in the wireless LAN. B Leave the default setting. The Mer produkthjalp finns pa http://www. support. zyxel. se and wireless client must use the same channel ID. C Select a level of wireless security. Choose Auto or None. D For Auto security select Yes to enable OTIST. If you select None select either Yes to enable OTIST or select the No radio button and click Next to configure OTIST later. E The default OTIST Setup Key is "01234567". This key can be changed in the web configurator. Be sure to use the same OTIST Setup Key on the Mer produkthjalp finns pa http://www. support. zyxel. se and wireless clients. A B C D E 8 ENGLISH Basic(WEP) Security A Enter a unique name to identify the Mer produkthjalp finns pa http://www. support. zyxel. se in the wireless LAN. B Leave the default setting...